Can the car be equipped with an alarm? How to install?

sortIndustry news
Date：2019-05-20 09:05

Q: Can Lifan KPT200 be equipped with an iron general two-way alarm? How to install it? A:

1. Adding electrical appliances is easy to cause battery loss. It is recommended to use the original factory configuration. If special modification is required, please carefully modify it without affecting safety performance;

2. EFI has strong requirements on the main cable. It is recommended to take power from the battery separately. Do not damage the main cable.

3. It is recommended to follow the alarm manual for wiring without affecting performance.

Where is the coolant replacement released?

1. KP series for antifreeze firstly put out the antifreeze in the radiator. The left radiator can loosen the engine drain bolt to release the water. The right radiator needs to be removed from the engine throttle valve and the right radiator bottom connection pipe. Discharge the water, remove the pipe from the storage tank or remove the storage tank to release the antifreeze;

2. When replacing the antifreeze, fill up the antifreeze of the main water tank (ie radiator), start the engine and add it to the engine to open and discharge the air. Cover the water tank cover and add the water tank under the seat cushion to the upper and lower scales. .

Why does the oil-cooled engine change when it is violent for a while? What is the reason for speeding up?

1. If the speed does not go up after the speed is increased, please check whether the clutch friction plate is worn or slipping. It is recommended to replace the clutch friction plate;

2, can not be violent operation when riding, otherwise it will shorten the service life of the engine clutch, it is recommended to check with the dealer;

3. The windshield engine front and oil cooler parts cannot be installed with windshield, otherwise the engine will not get good heat dissipation;

4. After the engine works for a period of time, the temperature will rise. It is normal to have a certain attenuation after the heat is on. It is recommended to purchase a water-cooled model.

How to adjust the carburetor mixing ratio?

I don't know which model you are talking about. The carburetor mixing ratio adjustment is more complicated and requires a certain amount of expertise. The general vertical type carburetor mixing ratio adjustment is clockwise, counterclockwise is thick, horizontal The mixing ratio adjustment of the model carburetor is adjusted clockwise and counterclockwise is adjusted. It is adjusted according to the engine speed variation. It is recommended to check the adjustment at the dealer.

I want to ask KPM about nine thousand turns, the speed does not go up, is it restricted?

1. Please check if the neutral speed can be pulled above 10000 rpm. If the neutral position cannot be 10000 rpm, please check if the oil supply, spark plug and ignition coil are abnormal. If the neutral position can be 10,000 rpm, the ignition is not problematic, please check the clutch. Whether the friction plate is worn or slipped;

2. Please check the air filter for dust. It is recommended to clean the air filter.

PREV: Practical | How often does the motorcycle change the oil?

NEXT: How many kilometers should the spark plug change?

PREV: Practical | How often does the motorcycle change the oil?

NEXT: How many kilometers should the spark plug change?

Back to list